The REAL Story on R410a Refrigerant
Many of the older refrigerant dryers sold around the world use a refrigerant called R-22. Emissions of
R-22 are considered by some experts to be a significant factor in depleting the ozone layer that protects
animals and people from harmful rays from the sun.

Companies now have the choice to purchase a refrigerant dryer that uses a more efficient and
environmentally friendlier refrigerant called R-410A, which is not only a good choice from an ecological point of view but also from a economical point view. What Makes R410a A Better Refrigerant? It’s Environmentally Friendlier. If the refrigerant system ever leaks, the escaping refrigerant won’t contribute to ozone depletion, unlike R22.  Additionally, at the end of its life the unit will be easier and
cheaper to dispose of in an environmentally friendly way.

The risk that R-22 will become expensive or difficult to get in the future is avoided.

The old refrigerant R-22 will be phased out along with other ozone depleting chemicals, and
both supply and demand of this chemical will be significantly affected by current and upcoming
regulations. By selecting a dryer that uses R-410A, you will avoid the risk associated with
purchasing a product that is destined to become obsolete.  Click here for entire article
Air Solutions
Tired of compressed air problems?
There really is a difference in compressed air suppliers. Develop a partnership with the world's leading compressed air distributor and service center. Only Employee Owned Air Technologies® has the people, product and system resources to provide our customers superior service and value every day. Air Technologies® truly can lower the cost and increase the reliability of your compressed air utility. Contact us today to discover the Air Technologies® Advantage.
614-342-6313
by Air Technologies       An Employee Owned Company since 1963
More information is available at www.depreciationbonus.org.
2008 Economic Stimulus Act
Atlas Copco air compressor systems qualify for the 2008 Economic Stimulus Act.  This Act allows you to deduct 50% of the cost of new equipment that's placed in service during the 2008 calendar year.  Check with your accounting department or tax expert to see how you can take advantage of this. 

AIR TECHNOLOGIES        Your #1 Source for Compressed Air Equipment, Service & Parts                                                                                       November 2008
What to Look for When Purchasing a VSD Air Compressor
ALL VSD AIR COMPRESSORS ARE NOT CREATED EQUAL
Purchasing a VSD compressor is a big investment - you need to know what to look for and what questions to ask to make sure the compressor you buy will save you the most energy and is the most reliable machine.   After all, a good VSD compressor may save you up to 35% in power cost the first year.  Another benefit of the VSD compressor is that it helps your company GO GREEN.

Here are some standard features that will help you get the most out of your VSD compressor:
1.) TEFC inverter duty motor
2.) Integrated drive
3.) No speed windows
4.) Protection against bearing currents
5.) Harmonic control
6.) Electromagnetic compliance
7.) Maximum turndown
8.) Drive and compressor microprocessor are linked
9.) Warranty

1.) TEFC inverter duty motors have inherently higher cooling air flow. Therefore, at lower speeds, there is enough flow to avoid overheating. The efficiency is high in the entire speed range and there is also sufficient torque. When you use a fixed speed motor in a variable speed drive application, it has a negative effect. When the speed reduces, the cooling air flow will also reduce. This results in overheating of the windings and a consequent reduction in efficiency and motor torque. You want to get the most out of your compressor so the more 'turndown' the more energy savings!
Click here to read entire article
Air for Sale   A just released article from Plant Services magazine
Plants trade compressor hardware for 100% reliable air supply.

PlantServices.com

Compressed air is industry’s fourth utility. Along with electricity, water and natural gas, compressed air is a resource that powers everything from handheld pneumatic tools to plant-wide manufacturing systems. Most plants produce their own compressed air. Many, however, are treating compressed air like they would any other utility. They purchase compressed air, not compressed air equipment.

In simple terms, a third-party supplier produces compressed air on a user’s site and the user agrees to purchase the quantity and quality of compressed air required. A pioneer and one of the largest suppliers in the United States is DirectAIR, a division of Air Technologies (www.directair.com).                                                     Click here for entire article
Economic Stimulus Act + Low Interest Financing = NEW COMPRESSOR!
If you need new compressor equipment now is the time to take advantage of our governments Economic Stimulus Act along with our low interest financing.  With very little money down we can arrange financing or leasing right now so you can become more efficient with new equipment and start saving money.  It may be possible that the money you save in energy will pay for the new equipment.  Call for details.
Complete air system outside of your production plant.  Guaranteed pressure, flow & dew point!
CONTACTS
ServiceParts
866.468.9814866.300.2601

New Equipment Rental Hotline
614.342.6313        513.539.6753

email   Answer Desk